Home | Gallery | Boat Plans | Boat Interiors | Books | The captain | Brokerage


L.O.A. 
27'
L.W.L. 
24' 1"
BEAM
9' 6"
DRAFT 
1' 3" (Hull only)
SUGGESTED POWER
Twin Outboards to 175hp each
TYPE 
Sportfisherman
CONSTRUCTION
Cold-molded plywood/epoxy covered with epoxy-impregnated Xynole- polyester fabric. Four-pound density closed-cell polyester foam  is used in sealed compartments, ice box and bait well. All wood components are epoxy-sealed and epoxy-painted during the construction process. Final finish is linear-polyurethane. The hull is built of sheet plywood (3/8" double-diagonal bottom, 1/2" sides and decks) molded over design-station frames (removed), bulkheads, transom, stem and keelson. Longitudinals are cut from Douglas fir stock.
PLANS 
Full construction plans (3 pages) plus Notes. Although
construction is straightforward, the boat is complex enough that perhaps it should not be attempted by the first-time amateur.